Pvc Sliding Doors Manufactures | Upvc Door Hinge Manufacturers | Polyurethane Foam Pipe Section | PUF Pipe Sections Exporters

These are Lap type Doors where the chances of leakage are next to nil.
Emergency Emergency release with knob is available inside of the Door.
Gasket Very Flexible specially designed Imported Gasket to provide hermetic sealing. Specially designed gasket holder with gasket is key factor in deciding sealing.
Door Panels are provided of Anodised Aluminium profile specially designed to fit the gaskets. Door Leaf is with PPGI sheet with PUF Density of 40 Kg/M3
Door Frames are of Imported PVC profile from Cold Tech-Italyto fit the Wall Panels with Perfect Seals.
Imported Hinges are Heavy Duty Rust free Self lubricating Imported with Cam to provide lifting movement while closing.
Locking Systems:- Made of SS and imported from Italy.
Sizes 900-1800, 900-2000, 1000-2000, 1200-2100
Door Leaf Thickness-68mm,92mm &120mm to fit for Panels of 60mm,80mm,100mm &120mm thicknesses.

Sliding Doors

Operation:- Manual or Motorised depending on application or clients requirements.
Frames:- Specially designed Frames imported from Cold Tech- Italy.
Door Leaf:- Anodised Aluminium Profile.
Components for Movement:- All imported from Cold Tech- Italy.
Sizes:- 1200mmX2100mm,1500mmX2400mm,1800mmX2400mm -Normally.
Other sizes can be provided on Request.
Door Leaf Thicknesses-68mm,92mm &120mm to fit on the Panels of 60mm,80mm,100mm&120mm.
Very Low Heat Leakage
Robust Design
Low Maintenance cost
Suitable For Chiller, Freezer and Blast Freezer Application
Suitable for Food Processing Units,Refrigeration application,Cold Rooms &cold storages, Medical Industry and for clean Rooms
Rust and Maintenance free parts on exposed and moving areas.

Refrigrated rooms Doors
Thickness of Door varies as per Requirement

For Chiller Application temp upto +2 Deg.C - 68mm
For Freezer/Blast Freezer with temp.upto(-30Deg.C) application - 92mm /120mm
For Blast Freezer with temp below -40Deg.C Application - 150mm/200mm

With pre coated sheet of specified thickness on both sides.
S.S. 304 Sheet /Al.sheet can be provided on request.

HINGED & SLIDING DOORS